What are the hazards in a powder coating factory?

In accordance with the factory rules and regulations of operation, there will be no harm. This is a new type of paint, which is in line with the requirements of the national environmental law production process.

Factory rules of operation:

1. Keep away from fire and avoid direct sunlight. It should be placed in a well-ventilated place with a temperature below 35℃.

2. Avoid being stored in places easily contaminated by water, organic solvents, oil and other materials.

3. Do not expose the powder in the air after using the powder coating powder. The mouth of the bag should be sealed or tightened at any time to avoid impurities.

4, avoid long-term contact with the skin, the powder attached to the skin should be washed clean with soapy water, do not use solvents. Safety of painting construction site.

5. The equipment used in painting operation should be well grounded to eliminate static electricity.

7e97c889a2f4be3a4df891cc7c3734b4

6, avoid the coating machine gratuitous discharge phenomenon.

7. In the powder spraying room, the concentration of planktonic dust should be controlled below the safe concentration as far as possible to avoid the danger of dust fire and explosion.

Powder coating powder is a solvent free, 100% solid powder coating. It has the characteristics of no solvent, NO pollution, recyclable, environmental protection, saving energy and resources, reducing labor intensity and high mechanical strength of the film.

Its features are:

1, the product does not contain toxic, does not contain solvent and does not contain volatile toxic substances, so there is no poisoning, no fire, no "three waste" emissions and other public hazard problems, fully in line with the requirements of the national environmental protection law.

2, the utilization rate of raw materials is high, the powder produced by some well-known brand powder suppliers, the powder can be recycled, the highest utilization rate can even reach more than 99%.

Scroll to Top